any questions about our products?
If you have any questions about our products or accessories in general or in particular, then give us a call. We look forward to hearing from you.
You are also welcome to write to us.
Chiller with very low refrigerant charge
The MultiChiller is the basis for our system concepts. This and the associated components are part of a MultiChiller kit. They are designed and approved for indoor installation. The MultiChiller itself consists of a closed cooling circuit with a unique plate heat exchanger. All refrigeration components are located in a monitored housing. The refrigeration cycle has an extremely low refrigerant charge, which, depending on the version, is between 0.5 and 2.4 kg propane / propene or butane.
Depending on the application, the power ranges from 5 to 75 kW. The MultiChiller can be used as a single device or when using several devices in a hydraulic network (up to 8 MultiChiller). This means that cooling capacities of up to 500 kW and possible redundancies are possible. To make assembly easy, we offer a suitable hydraulic module. With this you can connect up to 8 MultiChillers at the same time. As an example, see on page 9 “MultiHydro”. Each multi-chiller is supplied via its own separate control (MultiControl). The MultiChiller V-Series has a control integrated in the housing including frequency converter.
- cooling capacity: 5 kW to 75 kW
- thermal output: 9 kW to 100 kW
- dimensions w/d/h: MCS 882/630-700/782 mm
- dimensions w/d/h: MCM 1205/690-760/782 mm
- dimensions w/d/h: MCL 1399/690-760/782 mm
- weight: ca. 350-450 kg
- Various sizes available
- frequency converter
- Soft start for motor current limiter
- deal solution for indoor installation with a very low refrigerant charge
- Safe, maintenance-free 1) & environmentally friendly refrigeration technology
- Compensators to compensate for dimensional differences
- Individual, modular and quick exchange when servicing
- No repeat test by ZÜS
Compact design, easy assembly and installation
The compact design of the chiller allows the transportation with a lift truck. Low filling quantities allow the installation indoors. Since the chillers are developed as plug’n’play system, they can be easily installed, connected and immediately commissioned.
Individual, modular and exchangeable
Due to the different sizes, the systems can already be adapted to the individual solution with one device only. For higher capacities, several chillers can be interconnected hydraulically without problems. Due to the simple plug-in system, it is also possible to replace the individual components or chillers quickly and uncomplicatedly for service purposes.
Safe, maintenance-free and environmentally friendly plant operation
A TÜV (German Technical Inspection Association) certified safety concept via gas sensor and ventilation system, as well as the use of natural refrigerants with minimum potential for CO2 emissions ensure a sustainable and environmentally friendly operation of the plant.
Downloads: MultiChiller S/M/L
The modular system "MultiChillerKit"
The Futron refrigeration plants are flexible and individually configurable.